Tips to keep your tumble dryer working
April 4, 2013 | Laundry Appliance Repair, Help & Advice | No comments
Keep your clothes dry and your wallet happy by carrying out these regular checks on your tumble dryer!
Here are some tips to ensure you’re getting the most out of your machine and ensure it’s as energy efficient as possible.
Clean The Filter
The tumble dryer filter should be cleaned every time you use your tumble dryer. A clogged filter won’t allow the air to flow freely in the machine and thus causing it work harder to dry your clothes. Working harder = higher cost to you.
Clean The Heat Exchanger
Steam is extracted from the drum of a condenser tumble dryer and is then turned into water via the heat exchanger. This should be cleaned regularly by removing it from the machine and running under water to get rid of any built-up dirt and debris.
Clean The Sensor
If your tumble dryer uses a sensor make sure you wipe the drum every few months with white vinegar or stainless steel cleaner.
Empty The Reservoir
If using a condenser dryer, remove and empty the water reservoir after each load. This way, if you’re drying a particularly large load, you won’t have to stop the operation mid-cycle to empty.
If you’re tumble dryer has been behaving strangely or your think it may have developed a fault, you can diagnose and fix the problem by heading over to our Advice Centre.
For more ways to prolong the life of your appliance, check out these common tumble dryer mistakes to ensure you are using yours correctly.
